• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace a Composite Door Handle

Door handles can make a huge improvement to the look of your composite door panel replacement or UPVC door. There are a variety of handles available, regardless of whether you are looking for a classic antique black composite door scratch repair or stainless steel suite.

It's much easier to change your door handle than you think. Follow these simple steps and you'll have your new handle installed in no-time.

1. Measure the Door

The first step when replacing a composite door handle is to determine the proper size of the new handle. The easiest way to do this is to measure the existing handle. The measurements you must take are the centre of the spindle hole (also called the PZ measurement) and the centre of the Euro hole in the cylinder.

Once you've got the measurements, you can start searching for the right handle. There are many handles available, so it's important to spend the time to choose the one that is suitable for your style and your home. Choosing the right door handle isn't just about looks, it's also about function and security.

When you are looking for a new door handle, ensure that you measure the door opening and not the brick opening. This will enable you to obtain a more precise handle size and ensure that it is a good fit. You should also be aware of the backset of your door. This is the distance between the center of the hole in the handle and the door's edge. Most uPVC doors have backsets of 2-3/8" or 2-3/4". Select the handle with the proper backset.

There are several ways to measure the door handle. The most popular method is using the use of a tape measure. Use a measuring tape that is calibrated for the most effective results. When taking the measurements it is crucial to keep in mind that the measurements are measured in millimetres.

Once you've made the measurement and you're ready to make a decision whether you want to replace just the handle or the whole handle set. Changing the handle set is usually a less complicated process, and can save you money in the end.

Install the new handle after removing the old one. The process is simple and the final result will be flawless. Be careful not to lose any screw and ensure that all features are aligned correctly. Once the new handle is installed, it's a good idea to test its operation by dragging it up and down and locking and unlocking it.

2. Remove the old handle

Door handles are among the most crucial elements of a door, bringing the appearance and functionality. Replace them if they are damaged, loose or dated. It is a relatively easy and quick project that can make a significant difference to the look of your home. Before you can install a new handle, you must first take off the old one. Make sure the holes are large enough to accommodate the new handle.

Most types of door handle are secured with exposed screws that are easy to remove. Some designs, however they are more difficult to get off. Look for a small hole in the neck of the handle, usually close to the connection between the base and the latch plate. Make use of a screwdriver or an Allen wrench to press the fastener. You should be able to pry off or unscrew the handle. When you do this, be cautious as the handle and latch plate could fall out of the hole in the door. If this happens, tuck two half-circle pieces of cardboard (not construction paper or box cardboard) into the holes that you removed the bolts. This will secure the handle and latch plates and stop them from falling to the bottom of the door.

If the handle isn't screwed it could be held in place by a pin or snaps into an opening in the bezel, above the lock mechanism. In such cases, you'll need to remove the entire cover or rose plate first, and then the handle itself. Some handles come with a screw that holds the latch plate, which can be unscrewed.

When you have removed the old handle you should find a set of holes in the door slab which will be exactly the same size as the latch plate set in the door jamb. Make sure you choose the replacement handle that has the same size of latch plate to avoid having to repeat this step. You should also make sure that the strike plate, which is inserted in the door jamb and is used to support the latch when it's closed, fits with the handle you select.

3. Install the New Handle

The door handle is an important part of the front door as it lets you into your home and provide security for you and your family. If, however, the handle starts to lose its shine or becomes difficult to operate, it is time to replace it. It doesn't matter if it's for aesthetic reasons or due to it being damaged, replacing your door handle is a simple task that anyone can do themselves without having to call a professional.

Before you start the replacement, ensure that the door is opened by using a door stop, or any other piece of equipment you have in your home that will prevent the door from closing while you are working repair scratch on composite door it. This will stop the door from closing behind you while you attempt to install your new handles. It will make the process simpler.

When you have the door secured open, you'll have to loosen the screws holding the existing knob in place. They are usually located on the side of the door. They may be covered with the cover plate for aesthetic reasons. After the screws are removed, remove the door handle that was previously in use and make sure the holes are not blocked. The spindle of the new door handle must be put into the hole so that it is able to be seen on the opposite side.

Check that the screw holes on the handle match the holes on the door, and also that it is positioned in the correct direction. If the handle is a lever, this must be installed with the open end facing toward the hinges on the door or if it's a doorknob, this must be fitted with the closed end facing away from them.

It is also necessary to choose the appropriate composite door handle replacement. The most common handle is a lever with two holes on either side. This is suitable for left- and right-handed doors. You'll need to determine the distance from the door's edge to the center of the knob's opening which is called the backset, and ensure that the new handle you choose to purchase will fit this measurement.

4. Secure the Door

It is possible to replace the door handle for various reasons, such as age, damage, or because it no longer looks as attractive as it used to. It could be a sign it's time to upgrade to something more modern or upscale. Whatever the reason, it is an easy and inexpensive process that can be carried out in no time at all.

There is a range of different handles available and it is essential to select the best one for your needs. It is popular to choose the lever-lock or lever as it offers excellent security and is easy to use by users. It is often paired with a multi-point automatic lock or slam shut locking system to ensure extra security in the event of an attempted break in.

Another option is to pick a bar handle that is long. This handle is more decorative and is usually used with mortice locks and a night latch for extra security. It is typically seen on the outside of doors and adds a an elegant and striking look to your home.

Keyed handlesets are a popular choice, as they offer a level of functionality that makes it easy to secure your home. They are comprised of an exterior handle, a latch operated with the thumb, and a dead bolt. Installing them is easy, since they are able to use existing holes.

It is important to check the new handle for proper operation before leaving the house. Check that the handle moves smoothly and without any lag. Also, ensure that the bolt is locked properly. Close and open the door several times to make sure that it is secure.

In the event of a crisis the use of a simple chair could be used as a temporary barricade to secure the door. Find a chair that will fit under the handle, then wedge it in so that it is unable to be opened. This method might not be as efficient as other methods but it's a great temporary solution to keep your home secure.