• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Door Handle replacement door handles

It's worth it to replace door handles if you don't like the way they look or if they are difficult to use. Installing the new handle on your door is simple if you have patience.

The majority of modern door handles come with cover plates that hide the screws for an attractive appearance. If the new handle doesn't have them already connected, you'll need to attach them separately.

Take off the handle from the old one.

The door handle is not only a decorative addition to your home, but it's also a safety feature that allows you to lock and unlock the door. However, as time passes your door handle can lose its grip, feel loose, or look old and worn. This is a good indication that it's time to replace the door handle.

If your door handle is becoming difficult to use, it may be time to replace it. This is an issue because it means that you are unable to not lock or unlock your door which could be the risk of security for you and your family.

Another reason to replace the door handle is if it's damaged or broken. A broken door handle can be extremely dangerous, particularly if your children or elderly family members are unable to open it and end up trapped inside. It's easy to replace a broken handle on doors.

The majority of modern door handles are standard size and therefore will fit on any door. If you are not sure if the new door handle you are buying will work, take off the old one and measure the holes in its housing. This will enable you to buy the right size door handle.

The easiest method to remove your old door handle is to take it off of the door. Usually you'll need a screwdriver. However, some door handles have an outer cover plate that hides the screws that mount them, so you'll need to remove this cover plate to get access to the screws beneath. Once you've removed your old handle, take a note of how the spindle is attached so that you can be sure to align it when you install your new one.

You can also remove the door handle by unscrewing the latch mechanism. This is usually done using a screwdriver but you'll need to find the small latch, which should be on the edge of the trim piece. After you have removed the latch, you can take the handle off the strike plate, and then the latch away from the door's edge.

Remove the Strike Plate

When replacing your handle, you'll also want to replace the latch plate that holds the hole that the door's latch is inserted into when it closes. The new handles will have two latch plates that are circular tilt and turn window handles rectangular plate (see the diagram above which illustrates the components of a door handle). If you have a rectangular latch plate, you can replace it with a circular one. This will allow the latch to hook into the strike plate and make the handle easier to use.

The first step is to loosen the screw that is holding the old latch plate in place. The screws can be very tight, and will require some force to loosen. If you are able, it could be helpful to have another person assist you with this task.

The latch plate should easily lift itself out of the door once the screws have been removed. If the latch plate is stuck or won't move, use a small hammer to scrape the edges. This can sometimes open the plate up.

You can now move on to creating the new door strike plate for installation. With the wood screws that were included with your new handles, screw the latch plate onto the inside of the doorjamb. Do not overtighten your screws as this can damage the strike plate.

If you're unsure whether the latch plate is in the correct position, try closing and opening the door to determine if it closes and latches correctly. If it does not you'll have to adjust the strikeplate either up or down, or forward or back until the door closes properly.

If the door is still moving or jiggles, you might need to increase the size of your latch hole on the strike plate. This is more prevalent on older doors. It can be caused by wear and tear, hinges that are too narrow, the incorrect size of the latch or damaged strike plate. If this is the case then you should use a filing made of metal instead of a chisel, or hammer to adjust the strike plate.

Removing the Latch

The latch is the metal piece that is angled that is able to move in and out of the hole on the inside edge of your door. The latch is moved forward when you turn the handle. It also hooks into a hole in the frame of the door to keep the door closed. If your door is wobbling when you close, an upgrade to the latch could be all you need to correct the issue.

It's difficult to see the screws that secure the latch to the door, however there's usually a small hole on the trim plate that allows you to insert a screwdriver in order to pry it off. After removal of the trim plate you will be able to pull off the latch and the bolts that hold it in place and the spindle that holds it.

If the latch isn't easily removed, use a paperclip or tool to take it off the handle mechanism. Place the item into the recessed latch slot, and gently twist it or jiggle until the handle and latch begin to split. You may have repeat this process a few times before you can pull the latch out.

It should be possible to slide the new latch into its slot without issues after you've removed the old one. Make sure that the latch is positioned correctly in the slot and lined up with the screw chambers, and then use the new screws to secure it to the strike plate and door frame.

Measure the existing backset (the distance between the center of the large hole on the door's front and the edge) before installing the new handle. You should also check that the size of the latch on the new handle is in line with the measurement of your existing handle.

If you are replacing the latch or handle or handle, or if the old lock cylinder has been damaged, then you'll need an entirely new one. If you're not replacing the locks the new latch should fit in the existing recess and work just fine with the keys you have currently. Choose a latch that has rectangular cover plates that match the handles you have.

Then remove the Cover Plate

Door handles may begin to look worn over time However, if you replace them with a contemporary lever on rose design it's a simple and quick DIY and decorating project that can improve the overall appearance of your home. You can buy complete sets that come with matching escutcheons as well as privacy adaptor kits.

The first step in replacing the door handle inside is to remove the cover plate or rose, which conceals the screws and mechanism inside. Use a flathead for removing the plate. It may have an opening on one edge or be held by a pin.

After the cover plate is removed take the screw that holds the interior handle in place and set it aside. It is also necessary to remove the screws that hold the latch and plates to the door, which you can accomplish by loosening them using a Philips screwdriver. Remove the inner plates and latch from the door. Set them aside.

Some doors don't have this gap. If yours does not then you'll have to drill a hole into the door to install the new handle. The procedure to do this is the same as opening a door using a lock, but you'll need to take extra care to avoid damaging the frame or door.

Installing new door knob screws is necessary after the holes have been drilled. Make sure to buy the same size as the old ones, to ensure that you don't end up with an handle that is either too tight or too loose. You'll also have to install an additional strike rod and latch plate that aren't included in the majority of door handle sets.

Amazon's Choice FAERSI 2-piece upvc chrome door handles finish handle sets are an excellent option if you're in need of a premium interior door handle replacement set. It's a factory-fit product and has received hundreds of 5-star reviews. It's a great option to replace damaged or worn interior door handle hardware on your Chevy HHR.